Asante-technologies 10Base2 Manuel d'utilisateur télécharger pdf (Page 12)

Mini MAU

Page

9

Thin cable (10Base2) with Mini

MAU

Connect the 10Base2 Mini

MAU to the device’s AUI port.

Before the 10Base2 Mini MAU

is connected to the thin Ether-

net cable, there may be a

straight-through (barrel) BNC

connector in the cable at the

location where a node connec-

tion is available.

Simply remove the barrel con-

nector, and

c

onnect a “T” con-

nector to the BNC port on the

Mini MAU. The connector

slips on, twists, and locks in

place.

❖

Note:

Check with your network adminis-

trator before disconnecting cable. Other

users must be warned of the interruption

of network operations. Even if the network

uses self-terminating media or connectors,

users downstream from the break will be

affected.

❖

minimau Page 9 Monday, August 26, 1996 11:02 AM

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 25 26

Commentaires sur ces manuels

Pas de commentaire